Newmar 32-12-25 DC Converter

32-12-25 DC ConverterConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features:Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within ratingHeat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of componentsPolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environmentsNumerous Converter and Load Protection Circuits:Current limitingAutomatic thermal shutdownShort circuit proofReverse polarityOvervoltage protectionCarries CE markSpecifications:Input Voltage: 20-50Output Voltage: 13.6Output Amps (Intermittent): 25Output Amps (Continuous): 20Case Size (H x W x D): 6.0 x 4.7 x 14.0 inches (15.2 x 11.9 x 35.6 centimeters)Weight: 7.5 lb. (3.4 kg)Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)Ripple: 150 mV P-P maximumRegulation: 1% Line/LoadSwitching Frequency: 40 KhzEfficiency: 85% – Typical.Isolation: Output/Chassis; Input/chassis: 250 VDCDuty Cycle Ratings*:Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.Continuous: 24 hours, 100% duty *24-12-3: 2 minute max. on timeIdle Current: Less than 100 mA (including power “ON” light)Operating Temp Specifications:0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.Thermal shutdown @ 70 degrees C Case TemperatureModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees CMechanical Specifications:Powder coated aluminum heat sink caseFront panel terminal blockHeavy duty mounting flangeConformal coated PC boardOptions:Operation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)Extreme vibration mounting kit. (Information below) Option: Extreme Vibration Mounting KitThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.